GTS Flexible Materials Ltd

GTS100
Cast adhesive- based on a modified polyester system. This is a cast film of non-blocking, thermally activated adhesive, coated onto a release paper carrier. It is possible to incorporate colours, fire retardant additives and blocked catalysts into this adhesive.

GTS102
Cast adhesive- based on a modified blocked thermoset polyester adhesive system. See GTS100.

GTS200
Pressure sensitive, acrylic based coated tapes. These tapes are available on a number of adhesive thicknesses coated onto various thicknesses of polyester film. Alternative substrates can be coated. The adhesive is protected with a paper release film.

GTS300
Polyester film coated with a modified polyester adhesive. These tapes can be single or double side coated in various thickness combinations and are further available with other properties, i.e. GTS302, GTS320, GTS322 and GTS340.

GTS302
With the addition of a blocked catalyst which after activation at 120ºC will provide cross linking and form a  thermoset adhesive system.

GTS320/322
The same adhesive as GTS300, but coated onto a polyimide film.

GTS330
A higher melting point than the GTS320 adhesive, coated onto a polyimide film.

GTS340
An adhesive such as used in GTS300/302, but containing fire retardant additives, coated onto a polyester film.

GTS341
The same base adhesive system as GTS340, but containing blocked thermoset properties.  This product is UL ® recognised with a UL No. E107735.

GTS3480
A modified flame retardant epoxy adhesive with high temperature and humidity resistance, coated to one or both sides of polyester film.

GTS3600
Cast adhesive- based on a modified fire retardant epoxy adhesive.

GTS3640
A modified flame retardant epoxy adhesive system as GTS3480, but coated to one or both sides of PEN film.  This product is UL ® recognised with a UL No. E107735.

GTS3660
A modified polyurethane adhesive system, coated to one or both sides of PEN film.

GTS3700
Cast adhesive, based on a modified acrylic system. Coated onto a release paper carrier, it has high temperature and chemical resistance after thermal activation to cross link at 170ºC.

GTS3740
Tape - polyimide film (Upilex®) coated with a modified acrylic adhesive.  These tapes can be single or double sided with various thicknesses of adhesive and film.  It is recommended as a coverlay with GTS7740 laminate.

GTS3770
Tape – polyimide film coated with a modified acrylic adhesive. These tapes can be single or double sided, with various thicknesses of adhesive and film. It is recommended as a coverlay in conjunction with GTS6700, GTS7600 or GTS7700 laminates.

GTS3800
Cast adhesive, based on an epoxy adhesive system. Coated onto a release carrier/support, it has high temperature and chemical resistance after curing at 170ºC.  

GTS3870
Tape – polyimide film coated with an epoxy adhesive. These tapes can be single or double sided, with various thicknesses of adhesive and film. It is recommended as a coverlay in conjunction with GTS7800.

GTS3840
Tape – polyimide film coated with a fire retardant epoxy adhesive. These tapes can be single or double sided with various thicknesses of adhesive and film. It is recommended as a coverlay with GTS7870 laminate. This product is UL ® recognised with a UL No. E107735.

GTS3840
Tape – polyimide film coated with a fire retardant epoxy adhesive. These tapes can be single or double sided with various thicknesses of adhesive and film. It is recommended as a coverlay with GTS7870 laminate. This product is UL ® recognised with a UL No. E107735.

GTS3890 
Tape - Polyimide film (PI) coated on one or both sides with a clear, non-halogen flame-retardant epoxy adhesive.  GTS3890 may be single or double sided for coverlay (CL) or multilayer bonding.  A cast adhesive is also available.  GTS3890 is recommended for use with GTS7890 copper clad laminate (CCL)

GTS5500
Laminate – polyester film laminated to electrodeposited or rolled annealed copper on one or both sides. The copper foil and polyester film are available in various weight and thickness combinations.

GTS5550
As GTS5500, but with a clear high temperature and improved solvent resistant adhesive.

GTS5560
As GTS5500, but with a higher temperature and improved solvent resistant adhesive.

GTS5570
As GTS5500, but incorporating fire retardant additives in the adhesive system, to give self extinguishing properties.  This product is UL® recognised with a UL No. E107735.

GTS5660
Laminate - PEN film laminated to electrodeposited or rolled annealed copper on one or both sides, with a high temperature resistant adhesive system.  The copper foil and PEN films are available in various weight and thickness combinations.

GTS5670
As GTS5660, but incorporating a modified flame retardant epoxy adhesive system, to give improved temperature and humidity resistance.

GTS6500
As GTS5500, but replacing the copper foil component with aluminium foil.

GTS6560
As GTS5560, but using aluminium foil rather than copper foil.

GTS6570
As GTS5570, but using aluminium foil rather than copper foil.

GTS6600
Laminate - polyimide film laminated to aluminium foil on one or both sides with PU H/T adhesive system.  Both the foil and film are available in various thickness combinations.

GTS6700
Laminate – polyimide film laminated to aluminium foil on one or both sides with an acrylic adhesive system. Both the foil and film are available in various thickness combinations.

GTS7500
Laminate - glass fabric laminated with electrodeposited copper foil on one or both sides.  Standard thickness of glass fabric is 60 mu (2.4mil) with various weight and thickness combinations of copper foil.

GTS7600
Laminate – polyimide film laminated to high purity electrodeposited or rolled annealed copper foil on one or both sides. The polyimide and copper foils are available in various thickness and weight combinations. The adhesive is based on a high temperature and good solvent resistant polyurethane system.

GTS7640
As GTS7600, with a polyimide (Upilex®) film.

GTS7700
Laminate – polyimide film laminated to high purity electrodeposited or rolled annealed copper using a modified acrylic adhesive. The copper can be one or both sides. This laminate has excellent high temperature properties and is recommended in multilayer systems in conjunction with GTS3700 and GTS3770.

GTS7740
As GTS 7700, with a polyimide (Upilex®) film.

GTS7800
Laminate – polyimide film laminated to high purity electrodeposited or rolled annealed copper, using an epoxy adhesive. The copper can be on one or both sides. This laminate has excellent high temperature properties and is recommended in conjunction with GTS3800 and GTS3870.

GTS7870
As GTS7800, with a fire retardant epoxy adhesive.  This product is UL® recognised with a UL No. E107735.